I ran out to Susquehanna Riverlands State Park (US-9719) to test the EFHW again. This time I tied it to a bush and a picnic table and raised the center with the fishing pole mast.
I took the time to sweep all the bands with the X6100’s built-in analyzer app. 40m looked like it could stand to have the wire slightly shorter, but when I transmitted, the SWR looked fine. I saw about 1.5:1 SWR on 40, 20, and 15. 10 was a little off, so I guess I’ll add the 100pf capacitor that most people use.
The tuner made 12m and 17m work, so I made FT8 contacts on 40m, 20m, 15m, and 17m.
I was also trying out some of the combo winder/unun I 3d printed and made some notes. I’ll post my remix soon of another person’s OpenSCAD code. I like the all-in-one designs that wrap up into one package, but I wonder how much that will hinder my random experimentation with antennas.
While transmitting, I noticed the Evolve 3 laptop’s mouse would stop responding. I had seen this on other laptops using the 1/4 wave HF vertical. I added the common mode choke to the feed line near the radio, and that cleared up. There was already a choke near the antenna, but I guess it wasn’t enough. I love when I can see a clear cause and effect or problem and solution.
