Aubs

I have my UV-K5 and UV-K6 running aubs 00.07 firmware. I added a simplex frequency (446.100MHz) to use as with my local cross-band repeater in position 110. I added the new channel to scan list 1.

Upon powering on the radio, I could scan lists 1 (local repeaters) and 4 (satellites) together. When I press the up arrow to advance off an active channel, the scan would now skip list 1, and go right to 4, and continue to skip list 1. Before I realized it was happening, I thought the day was super quiet.

I dropping the repeater frequency from scan list 1, and the scanning behaved correctly. I tried removing another channel from scan list 1, and reintroducing channel 110 to the list, but that didn’t fix it, so it’s not an issue with the count.

Much of scan list 1 is lower in the channels, so I moved my new repeater frequency from channel 110 to position 30, right after all my other simplex channels. That seems to work fine, so that’s how I’m leaving it.

I may need to try some more things and figure out a reproduction to file a bug on the project:

• Is it something about the frequency of 460.100?
• Or is channel 110 the problem?
• Would another frequency in that spot be a problem?
• Are there other channels that would trigger the issue?

I’m trying out the Aubs 00.07 firmware on my Quansheng radios. It’s based on the latest egzumer, and so far has kept up-to-date, and it has its own plugin for Chirp.

It has some really cool features for scanning:

• scan on start, a feature I requested of egzumer, but was denied by egzumer.
• 10 scan lists. I organized mine as:
  • 1 = local repeaters and popular simplex
  • 2 = all simplex, Ham and GMRS
  • 3 = non-local repeaters and other listening
  • 4 = satellites
• press * to lockout a frequency from scan.
• fast scan like egzumer
• frequency spectrum analyzer, but no memory spectrum analyzer like nunu.

This is my daily driver now on both my radios.